NetApp adopts Microsoft’s Business-to-Customer (B2C) Identity Management

Effective December 3 - NetApp adopts Microsoft’s Business-to-Customer (B2C) identity management to simplify and provide secure access to NetApp resources. For accounts that did not pre-register (prior to Dec 3) access to your NetApp data may take up to 1 hour as your legacy NSS ID is synchronized to the new B2C identity. To learn more, Read the FAQ and Watch the video. Need assistance? Complete this form and select “Registration Issue” as the Feedback Category.

SDU — SnapDrive 存储显示—在 Cisco 存储驱动程序（ RHEL 7 ）上找不到 HBA Assistant 的情况下，所有操作均会失败

最后更新
另存为PDF

Views:: 16

Visibility:: Public

Votes:: 0

Category:: snapdrive-for-unix

Specialty:: snapx

Last Updated:

状态信息

适用于

SnapDrive for UNIX （ Linux ） 5.3.208
： 00.0 光纤通道： Cisco Systems VIC FCoE HBA （修订版 A2 ）
子系统： Cisco Systems VIC 1240 MLOM FCoE HBA 内核驱动程序正在使用： FNIC RHEL 7.5

RHEL 7.5

问题

实际 SnapDrive 存储的 sd-trace.log 显示 -all 命令：
addErrorReport: (1) Operation:??? 6 1877:HBA assistant not found. Commands involving LUNs should fail. 0002-197 Admin error: Please verify that the appropriate transport protocol, volume manager, file system and multipathing type are installed and configured in the system. If NFS is being used, this warning message can be ignored.