跳转到主内容

适用于 Microsoft Windows 的 SnapCenter 插件在 Windows 应用程序事件日志中产生无害错误

Views:
15
Visibility:
Public
Votes:
0
Category:
snapcenter
Specialty:
snapx
Last Updated:

适用于

适用于 Microsoft Windows 的 SnapCenter 插件( SCW ) 4.3 或更早版本

问题

  • SCW 会在 Windows 应用程序事件日志中报告与以下示例类似的严重错误。

示例 1

Critical SDW PID=[<PID>] TID=[<TID>] The running command stopped because the preference variable "ErrorActionPreference" or common parameter is set to Stop: entry doesn't exist 
  at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
  at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper()
  at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc()

示例 2

Critical SDW PID=[<PID>] TID=[<TID>] The running command stopped because the preference variable "ErrorActionPreference" or common parameter is set to Stop: entry doesn't exist 
 at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
 at SnapDrive.Nsf.Common.PowerShell.PSHelper.RunCommand(Command command,
I等 分输入)

示例 3

Critical SDW PID=[<PID>] TID=[<TID>] The running command stopped because the preference variable ""ErrorActionPreference"" or common parameter is set to Stop: 
===================================================================================
| This cmdlet must be directed to a data vserver.  You are currently connected   |
| to the cluster admin vserver.  See the Toolkit web docs (Show-NcHelp) or online |
| help (Get-Help Connect-NcController -Examples) to learn more about directing   |
| Toolkit cmdlets to a cluster or data vserver as required by Data ONTAP.      |
===================================================================================

  at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
  at SnapDrive.Nsf.Common.PowerShell.PSHelper.RunCommand(Command command, IEnumerable input)

 

  • 中显示了与以下示例类似的输出SCWDebug.log

示例 1

Critical SDW PID=[<PID>] TID=[<TID>] The running command stopped because the preference variable "ErrorActionPreference" or common parameter is set to Stop: entry doesn't exist   at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
   at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper()
   at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc()

Verbose SDW PID=[<PID>] TID=[<TID>] ex.Message : The running command stopped because the preference variable "ErrorActionPreference" or common parameter is set to Stop: entry doesn't exist
Verbose SDW PID=[<PID>] TID=[<TID>] No retry condition match found or max retry reached. Throwing error The running command stopped because the preference variable "ErrorActionPreference" or common parameter is set to Stop: entry doesn't exist
Verbose SDW PID=[<PID>] TID=[<TID>] --PSHelper::RunCommand
Error SDW PID=[<PID>] TID=[<TID>] Failed to get FCP target node name for StorageSystem: svm1.demo.netapp.com
 entry doesn't exist
Verbose SDW PID=[<PID>] TID=[<TID>] ++StorageConnectionPool::CleanUpIfStale
Verbose SDW PID=[<PID>] TID=[<TID>] --TargetInfoCacheHelper::GetTargetInfo
Verbose SDW PID=[<PID>] TID=[<TID>] ++TargetInfoCache::ShouldGetTargetInfo
Verbose SDW PID=[<PID>] TID=[<TID>] --TargetInfoCache::ShouldGetTargetInfo
Error SDW PID=[<PID>] TID=[<TID>] FCP target information is null/empty

示例 2

Critical SDW PID=[<PID>] TID=[<TID>] The running command stopped because the preference variable "ErrorActionPreference" or common parameter is set to Stop: entry doesn't exist 
   at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
   at SnapDrive.Nsf.Common.PowerShell.PSHelper.RunCommand(Command command, IEnumerable input)

Verbose SDW PID=[<PID>] TID=[<TID>] ex.Message : The running command stopped because the preference variable "ErrorActionPreference" or common parameter is set to Stop: entry doesn't exist 
Verbose SDW PID=[<PID>] TID=[<TID>] No retry condition match found or max retry reached. Throwing error The running command stopped because the preference variable "ErrorActionPreference" or common parameter is set to Stop: entry doesn't exist 
Verbose SDW PID=[<PID>] TID=[<TID>] --PSHelper::RunCommand
Error SDW PID=[<PID>] TID=[<TID>] Failed to get FCP target node name for StorageSystem: <STORAGESYSTEM>
The running command stopped because the preference variable "ErrorActionPreference" or common parameter is set to Stop: entry doesn't exist
Verbose SDW PID=[<PID>] TID=[<TID>] ++StorageConnectionPool::CleanUpIfStale
Verbose SDW PID=[<PID>] TID=[<TID>] --TargetInfoCacheHelper::GetTargetInfo
Verbose SDW PID=[<PID>] TID=[<TID>] ++TargetInfoCache::ShouldGetTargetInfo
Verbose SDW PID=[<PID>] TID=[<TID>] --TargetInfoCache::ShouldGetTargetInfo
Error SDW PID=[<PID>] TID=[<TID>] FCP target information is null/empty
Error SDW PID=[<PID>] TID=[<TID>] iSCSI target information is null/empty

示例 3

Verbose SDW PID=[<PID>] TID=[<TID>] Getting iSCSI target info
Verbose SDW PID=[<PID>] TID=[<TID>] ++PSHelper::RunCommand
Verbose SDW PID=[<PID>] TID=[<TID>] ++ConfigManager::GetConfigSettingMaxRetryFileExist
Verbose SDW PID=[<PID>] TID=[<TID>] --ConfigManager::GetConfigSettingMaxRetryFileExist
Verbose SDW PID=[<PID>] TID=[<TID>] ++ConfigManager::GetConfigSettingRetryInterval
Verbose SDW PID=[<PID>] TID=[<TID>] --ConfigManager::GetConfigSettingRetryInterval
Critical SDW PID=[<PID>] TID=[<TID>] The running command stopped because the preference variable "ErrorActionPreference" or common parameter is set to Stop: 
===================================================================================
| This cmdlet must be directed to a data vserver.  You are currently connected   |
| to the cluster admin vserver.  See the Toolkit web docs (Show-NcHelp) or online |
| help (Get-Help Connect-NcController -Examples) to learn more about directing   |
| Toolkit cmdlets to a cluster or data vserver as required by Data ONTAP.      |
===================================================================================

  at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
  at SnapDrive.Nsf.Common.PowerShell.PSHelper.RunCommand(Command command, IEnumerable input)

..

Verbose SDW PID=[<PID>] TID=[<TID>] --PSHelper::RunCommand
Verbose SDW PID=[<PID>] TID=[<TID>] Failed to get iSCSI target node name for StorageSystem: <STORAGESYSTEM>
 
===================================================================================
| This cmdlet must be directed to a data vserver.  You are currently connected   |
| to the cluster admin vserver.  See the Toolkit web docs (Show-NcHelp) or online |
| help (Get-Help Connect-NcController -Examples) to learn more about directing   |
| Toolkit cmdlets to a cluster or data vserver as required by Data ONTAP.      |
===================================================================================


Verbose SDW PID=[<PID>] TID=[<TID>] Getting FC target info
Verbose SDW PID=[<PID>] TID=[<TID>] ++PSHelper::RunCommand
Verbose SDW PID=[<PID>] TID=[<TID>] ++ConfigManager::GetConfigSettingMaxRetryFileExist
Verbose SDW PID=[<PID>] TID=[<TID>] --ConfigManager::GetConfigSettingMaxRetryFileExist
Verbose SDW PID=[<PID>] TID=[<TID>] ++ConfigManager::GetConfigSettingRetryInterval
Verbose SDW PID=[<PID>] TID=[<TID>] --ConfigManager::GetConfigSettingRetryInterval
Critical SDW PID=[<PID>] TID=[<TID>] The running command stopped because the preference variable "ErrorActionPreference" or common parameter is set to Stop: 
===================================================================================
| This cmdlet must be directed to a data vserver.  You are currently connected   |
| to the cluster admin vserver.  See the Toolkit web docs (Show-NcHelp) or online |
| help (Get-Help Connect-NcController -Examples) to learn more about directing   |
| Toolkit cmdlets to a cluster or data vserver as required by Data ONTAP.      |
===================================================================================

  at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
  at SnapDrive.Nsf.Common.PowerShell.PSHelper.RunCommand(Command command, IEnumerable input)

..

Verbose SDW PID=[<PID>] TID=[<TID>] ++StorageConnectionPool::CleanUpIfStale
Verbose SDW PID=[<PID>] TID=[<TID>] --TargetInfoCacheHelper::GetTargetInfo
Verbose SDW PID=[<PID>] TID=[<TID>] ++TargetInfoCache::ShouldGetTargetInfo
Verbose SDW PID=[<PID>] TID=[<TID>] --TargetInfoCache::ShouldGetTargetInfo
Error SDW PID=[<PID>] TID=[<TID>] FCP target information is null/empty
Error SDW PID=[<PID>] TID=[<TID>] iSCSI target information is null/empty
Verbose SDW PID=[<PID>] TID=[<TID>] --TargetInfoCache::AddTargetInfoForStorageSystem

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support