跳转到主内容

scsi.cm.cmd.abortedByHost 错误的含义是什么?

Views:
113
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

可不使用  

适用场景

  • Data ONTAP 8
  • ONTAP 9

问题解答

当主机适配器因受到 I/O 请求的影响或由于 HA 超时而中止 I/O 请求时,会出现此消息。

示例错误:

1/29/2020 14:14:54  ClusterA_01   ERROR         scsi.cmd.abortedByHost: Disk device Switch_A_1:8.126L1002: Command aborted by host adapter: HA status 0x4: cdb 0x8a:00000001564c9200:00000200

消息中断:

日期 / 时间
1/29/2020 14:14:54  

报告节点
ClusterA_1  

严重性
ERROR        

错误
scsi.cmd.abortedByHost:

设备类型
Disk device

设备名称
Switch_A_1:8.126L1002:

HA 状态
HA status 0x4:

命令数据块
cdb 0x8a:00000001564c9200:00000200

 

这种情况并不一定意味着目标设备有问题。高工作负载会导致环路饱和、导致总线的设备争用。传输问题也会导致环路吞吐量降低、从而导致 I/O 所需时间比正常时间长。偶尔会看到,不需要执行任何操作;系统会通过重试已中止的 I/O 来自动处理该条件。与持续的错误情况(例如设备重置或传输错误)关联时,很可能是环路稳定性问题的症状。   

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.