跳转到主内容

更换启动设备后,是否应手动将缺少的 mcc.'xxxx' boottargets 添加到节点配置?

Views:
12
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

适用场景

ONTAP 9
MetroCluster FC
MetroCluster IP

问题解答

只要节点识别到启动设备已被更换,或者启动设备缺少当前配置且需要从备份中还原,就会清除以下仅限 MetroCluster 的启动目标。

 bootarg.mcc.adp_enabled bootarg.mcc.dr_aux_partner bootarg.mcc.dr_aux_partner_uuid bootarg.mcc.dr_partner bootarg.mcc.dr_partner_uuid bootarg.mcc.e0a.cfg bootarg.mcc.e0b.cfg bootarg.mcc.local_config_id 

无需在 LOADER 提示符处手动添加 bootarg 。

使用选项 6 将 varfs 备份配置成功复制回启动设备后, boottargets 会自动还原到启动设备。此过程涉及在出现提示时在启动菜单上发出选项 "6" ,并允许节点启动,直到 " 正在等待交还 " 为止。向节点发出 " 仅限 CFO" 交还后,只有根聚合才会迁移回受影响的节点,以便将变量配置完全复制到启动设备。

可从此处访问完整过程: 如何在 ONTAP 中使用启动菜单选项 " ( 6 )从备份配置更新闪存 "

追加信息

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.