跳转到主内容

ATTO 7500N/7600N FibreBridge 的其中一个电源 (PSU) 未联机

Views:
31
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

适用场景

  • ATTO 7500N FibreBridge
  • ATTO 7600N FibreBridge

问题描述

  • 并非ATTO 7500N/7600N FibreBridge的所有电源都处于联机状态
  • 当前未进行电源维护
  • 电源没有问题描述 -不同的插座/PDU仍存在错误:

警告: 出于故障排除目的、请勿重新拔插电源。

  • 已检查电源线并已正确就位
  • 事件日志报告电源出现故障: 

    Tue Jul 11 15:02:12 +0200 [NodeA_1: dsbridge_admin: fc.bridge.power.alert:alert]: Fibre Channel FibreBridge7600N Bridge ATTO_200000xxxxxx S/N: FB7600Nxxxxxx WWN: 200000xxxxxx Power Supply A has failed.
     
  • ONTAP 报告电源出现故障的错误:

::>system health alert show -alert-id StorageBridgePowerSupplyFailed_Alert

Node: node01 Resource: Power Supply Severity: Major Indication Time: Wed Nov 17 21:25:25 2021 Suppress: false Acknowledge: false Probable Cause: Power Supply B of "ATTO_10.x.x.x" has failed. Possible Effect: If the remaining power supply fails, "ATTO_10.x.x.x" will go offline, causing a loss of path redundancy to storage. Corrective Actions: 1) Check the power source for the bridge, the power cords and fuses. 2) If the problem cannot be corrected, replace the failed power supply.

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.