MetroCluster FCP LIF未在配对集群上使用预期接口

最后更新
另存为PDF

Views:: 23

Visibility:: Public

Votes:: 0

Category:: metrocluster

Specialty:: metrocluster

Last Updated:

This KB article is linked to the Interactive Workflow MetroCluster resolution guide.

适用场景

ONTAP 9
MetroCluster

问题描述

每个集群上的network interface show输出均报告DR SVM上FCP LIF的主端口与此SVM的源集群中使用的端口不同。

clusterA::> network interface show Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- vserver fcp_lif1 up/up 20:01:00:a0:98:ff:ff:ff clusterA-01 0f true fcp_lif2 up/up 20:02:00:a0:98:ff:ff:ff clusterA-02 0g true fcp_lif3 up/down 20:03:00:a0:98:ff:ff:ff clusterB-02 0f true fcp_lif4 up/down 20:04:00:a0:98:ff:ff:ff clusterB-02 0g true

clusterB::> network interface show Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- vserver-mc fcp_lif1 up/down 20:01:00:a0:98:ff:ff:ff clusterB-01 0f true fcp_lif2 up/down 20:02:00:a0:98:ff:ff:ff clusterB-01 0g true fcp_lif3 up/down 20:03:00:a0:98:ff:ff:ff clusterB-02 0g true fcp_lif4 up/down 20:04:00:a0:98:ff:ff:ff clusterB-02 0f true