跳转到主内容

无法在ATTO FibreBridge上运行带内和带外命令

  1. 最后更新
  2. 另存为PDF
Views:
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

适用场景

  • MetroCluster FC
  • ATTO 6500/7600N FibreBridge
  • ATTO网桥和平台升级

问题描述

  • 将网桥从ATTO 6500更换为ATTO 7600带内和带外命令后、无法运行
  • storage bridge show -instance  storage bridge run-cli -name ATTO_2000001086af2300 -command info输出显示错误：
Bridge Name: ATTO_2000000000xx0000 Bridge WWN: 2000000000xx0000 Vendor: Atto Model: FibreBridge 7600N Serial Number: FB7600N Firmware Version: 4.10 007A Management IP: 0.0.0.0 Errors: ATTO_2000000000xx0000(2000000000xx0000):Bridge is Unreachable over Management Network. Last Update Time: 2/18/2022 10:29:44 +01:00 Is Bridge Secure: true storage bridge run-cli -name ATTO_2000000000xx0000 -command info [Job 27081] Job is queued: Executing ATTO CLI command "info" on bridge "ATTO_2000000000xx0000".. Error: command failed: [job 27081] Job hit an internal error.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.