跳转到主内容

MetroCluster 解决方案中的 FAS8020 存储启动程序连接规则

Views:
77
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

状态信息

适用于

  • MetroCluster
  • ONTAP 9
  • 仅 FAS8020

问题

在集群模式 Data ONTAP 中的 MetroCluster 中,每个控制器必须有两个 HBA 启动程序连接到两个结构中的每一个以连接存储。此外,每个控制器还需要四个 HBA 启动程序端口。

使用 FAS8020 控制器时、可能只需要使用两个(而不是四个) HBA 启动程序端口来连接存储、以便使用单个空闲插槽进行主机连接或磁带备份。这仅适用于 FAS8020 ,而不适用于其他平台。此类型配置也可以称为“每个结构的单一启动程序”配置。

:如果使用 FAS8020 控制器配置了 MetroCluster 、并且更改了硬件配置、则必须评估这些规则才能添加 / 远程路径、以便继续支持配置。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.