跳转到主内容

NetApp_Insight_2020.png 

尝试切换时 DR 伙伴 Nvlog 镜像不是联机错误

Views:
8
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

状态信息

适用于

  • MetroCluster
  • ONTAP 9
  • EMS 日志: Sat Sep 08 00:42:34 CEST [NETAPP-21: ispfcvi2500_main1: fcvi.qlgc.sendIUError:error]: FC-VI adapter: Port 1a sendIU status = Port logged out(status code = 0x29), FCVI opcode = Connect Request(0x10), QP name = Control, QP index = 2, Remote node's system id = 1

问题

DR 合作伙伴 Nvlog 镜像未联机。

NETAPP-1::*> metrocluster operation show
Operation: switchover-simulate
    State: failed
Start Time: 8/29/2018 06:45:06
  End Time: 8/29/2018 06:45:13
   Errors: Failed to validate the node and cluster components before the switchover operation.
NETAPP-1::NETAPP-11 (non-overridable veto): DR partner NVLog mirroring is not online. Make sure that the links between the two sites are healthy and properly configured.

NETAPP-1::*> metrocluster interconnect mirror show
              Mirror   Mirror
          Partner Admin   Oper
Node Partner Name Type   Status   Status  Adapter Type   Status
---- ------------ ------- -------- ------- ------- ------ ------
NETAPP-11   NETAPP-12 HA  enabled online
                      mlx4_0  IB    Up
                      mlx4_0  IB    Up
       NETAPP-21 DR  enabled offline
                      fcvi_device_0 FC-VI Up
                      fcvi_device_1 FC-VI Up
       NETAPP-22 AUX enabled offline
                      fcvi_device_0 FC-VI Up
                      fcvi_device_1 FC-VI Up
NETAPP-12   NETAPP-11 HA  enabled online
                      mlx4_0  IB    Up
                      mlx4_0  IB    Up
       NETAPP-22 DR  enabled offline
                      fcvi_device_0 FC-VI Up
                      fcvi_device_1 FC-VI Up
       NETAPP-21 AUX enabled offline
                      fcvi_device_0 FC-VI Up
                      fcvi_device_1 FC-VI Up
12 entries were displayed

 

EMS Logs show:

Sat Sep 08 00:42:34 CEST [NETAPP-21: ispfcvi2500_main1: fcvi.qlgc.sendIUError:error]: FC-VI adapter: Port 1a sendIU status = Port logged out(status code = 0x29), FCVI opcode = Connect Request(0x10), QP name = Control, QP index = 2, Remote node's system id = 1

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support