升级期间的 Brocade 交换机启动环路

最后更新
另存为PDF

Views:: 13

Visibility:: Public

Votes:: 0

Category:: metrocluster

Specialty:: metrocluster

Last Updated:

适用场景

Brocade G620 交换机
光纤连接 MetroCluster
FOS 从 v8.2.1c 升级到 v9.0.1a

问题描述

重新启动交换机以升级到 FOS v9.0.1a 后，交换机会在启动环路中停滞。

在交换机控制台上可以看到错误消息。

示例

2021/06/11-06:09:08, [HAM-1004], 1645, CHASSIS, INFO, BrocadeG620, Processor rebooted - Software Fault: Watchdog Timeout.
2021/06/11-06:18:37, [HAM-1014], 54, CHASSIS, CRITICAL, BrocadeG620, Can't Restart: Restartable daemon (weblinker (pid=2313)) died during system bootup. Reboot.
reset reason was 0x00000002: CPU request

************************************************************** * * * System booted 5 times within 3000 seconds! * * * * Fabric OS has detected frequent switch reboot condition. * * Following actions can be taken to recover the switch: * * - Use supportsave to collect supportsave data. * * - Contact Brocade support team for further assistance. * * * **************************************************************