尽管通过带内监控ATTO网桥无法访问警报
适用场景
- 光纤 MetroCluster
- 通过带内监控ATTO 7600N FibreBridge
- 通过带内监控ATTO 7500N FibreBridge
问题描述
- 运行状况监控器警报显示在事件日志中：
[Node-01: schmd: hm.alert.raised:alert]: Alert Id = StorageBridgeUnreachable_Alert , Alerting Resource = 20000010XXXXXX0 raised by monitor system-connect
[Node-01: mgwd: callhome.hm.alert.major:alert]: Call home for Health Monitor process schm: StorageBridgeUnreachable_Alert[20000010XXXXXX0].
- 尽管存在带内监控、但系统运行状况警报仍显示"未通过管理网络监控设备"：
Cluster-02::> system health alert show
Node: Node-01
Resource: ATTO_20000010XXXXXX0
Severity: Major
Indication Time: Mon May 16 00:40:52 2022
Suppress: false
Acknowledge: false
Probable Cause: "ATTO_20000010XXXXXX0"bridge is not reachable over management network.
Possible Effect: Bridge "ATTO_20000010XXXXXX0" cannot be monitored for alerts.
Corrective Actions: 1) If the bridge is monitored by SNMP, verify that the node management LIF is up by using the "network interface show" command. Verify that the "ATTO_20000010XXXXXX0" bridge is alive by using the "network ping" command.
2) If the bridge is monitored in-band, check the fabric cabling to the bridge, and then verify that the bridge is powered up.
- 网桥监控器状态显示为"错误"：
Cluster-02::> storage bridge show
Is Monitor Managed Is Bridge
Bridge Symbolic Name Monitored Status By Vendor Model Bridge WWN Secure
------------------------ ------------- --------- ------- ------- ------ --------------------- ---------------- --------
ATTO_20000010XXXXXX0 BRIDGE1 true error - Atto FibreBridge 7600N 20000010xxxxxxxx false
- ATTO网桥可从一个集群访问、但无法从另一个集群访问
Cluster-01::> storage bridge run-cli -name ATTO_20000010XXXXXX0 -command "info"
[Job 17079] Job is queued: Executing ATTO CLI command "info" on bridge "ATTO_20000010XXXXXX0"..
Device Status = Good
Unsaved Changes = None
Device = "FibreBridge 7600N"
.....
Ready.
[Job 17079] Job succeeded.
Cluster-02::> storage bridge run-cli -name ATTO_20000010XXXXXX0 -command "info"
[Job 18764] Job succeeded: Bridge is currently unavailable. Wait a few minutes and then try the operation again.