跳转到主内容

disk-shelf-path-failure 上的 Active IQ Unified Manager 警报

Views:
28
Visibility:
Public
Votes:
0
Category:
oncommand-unified-manager
Specialty:
om
Last Updated:

状态信息

适用场景

  • OnCommand Unified Manager (所有版本)
  • Active IQ Unified Manager (所有版本)

问题描述

可以观察到以下情况之一:
Alert: The path to the disk shelves is broken at shelf port XX:XX
 

Event: Disk Shelf Multipath Not Configured
 

要验证与此知识库文章相关的问题描述,请使用以下知识库文章之一收集支持包:

在支持包中, ocumserver-debug 日志将包含以下日志条目: 


201X-XX-XX 14:44:42,946 DEBUG [oncommand] [alert-83] [c.n.dfm.impl.alert.EmailAlertAction] Sending email to [Insert_Email_Here] for alert 'Configured_Alert' with event 'disk-shelf-path-failure' for object 'Node_Name:0x:x' <-(Node_name:Port#:shelf#)

On the High Availability (HA) Partner, run sysconfig -a 
The output displays as the following: 

slot 0: SAS Host Adapter 0a (PMC-Sierra PM8001 rev. C, SAS, )
 Firmware rev:     0x.1x.0x.0x
 Base WWN: 5:00a098:0036d0f:eX
 Phy State:      [0] Enabled, 6.0 Gb/s
           [1] Enabled, 6.0 Gb/s
           [2] Enabled, 6.0 Gb/s
           [3] Enabled, 6.0 Gb/s
 QSFP Vendor:     available, but not valid
 QSFP Part Number:   available, but not valid
 QSFP Type:      available, but not valid
 QSFP Serial Number: available, but not valid

 

Scan to view the article on your device
CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support