跳转到主内容

Trident如何使用多路径处理ontap-san驱动程序的dataLIF设置

Views:
1
Visibility:
Public
Votes:
0
Category:
trident-kubernetes<a>dataLIF</a><a>2009338175</a><a>多路径</a>
Specialty:
snapx
Last Updated:

适用场景

  • 适用于OpenShift和Kubernetes的Trident
  • 驱动程序:ontap-san、ontap-san-economy.

问题解答

dataLIF 如果没有设置或仅使用特定的IP地址、Trident仍会创建与HA对配对节点的iSCSI LIF的会话。
 
如果 multipathd 未运行、并且未创建多路径的映射程序设备、则Trident将在节点连接上挂载一个新磁盘设备。
在这种情况下、如果连接IP消失(这些IP不会传输到其他接口或节点)、则不会存在HA对故障转移冗余。

追加信息

需要启用多路径、否则处理PVC时会出现问题、因为可能会出现有关其余磁盘设备的错误。
此外、它还应使用 find_multipaths = no、因为Trident将提供必要的功能。
 
注意: dataLIF 在Trident后端配置中、仅使用一个IP地址。此选项主要用于NFS、因为在SVM中使用多个LIF时、您可能需要指定通常在具有PVC卷聚合的节点上运行的IP。
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.